🛠🛠🛠 𝐒𝐮𝐩𝐞𝐫 𝐟𝐥𝐞𝐱𝐢𝐛𝐥𝐞 𝐑𝐆𝐁 𝐋𝐄𝐃 𝐬𝐭𝐫𝐢𝐩𝐬 𝐦𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 I am working on an unprecedented #manufacturing job. For me, of course. The latest project of mine contains multiple super flexible RGB LED strips. The chosen material is 𝗣𝗼𝗹𝘆𝗶𝗺𝗶𝗱𝗲 𝗙𝗹𝗲𝘅 𝟬.𝟭 𝗺𝗺 𝘄𝗶𝘁𝗵𝗼𝘂𝘁
🗜️🗜️🗜️ 𝗬𝗲𝘁 𝗔𝗡𝗢𝗧𝗛𝗘𝗥 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗩𝗶𝘀𝗲 𝗯𝘆 𝗧𝗵𝗲𝗚𝗼𝗼𝗳𝘆 I have used my 🔴 vise every day. The instrument is present in a majority of pictures documenting my hardware work. I am asked for the origin of the vise quite frequently. Here
⚙️⚙️⚙️ 𝐍𝐞𝐨𝐩𝐢𝐱𝐞𝐥 𝐝𝐫𝐢𝐯𝐞𝐫 𝐟𝐨𝐫 𝐒𝐓𝐌𝟑𝟐𝐋𝟎𝐱𝟏 𝐢𝐬 𝐫𝐞𝐚𝐝𝐲 I listed my TODO list of tasks on the Wearable project a few days ago. Now, I have full support for programmable RGB LEDs in my STM32L051 firmware pack. 1️⃣ A timer with
🧭🧭🧭 TrueRMS AC measurement on budget This is a tip for everyone with at least a low-expensive oscilloscope and does not have a TrueRMS DMM. 1️⃣ Your oscilloscope most probably contains a precise TrueRMS measurement engine. 2️⃣ Go to Measure
🔴🟢🔵 RGB LED test As I mentioned, I need to migrate my programmable RGB LED driver from the old library environment to the new HALs. 𝗜 𝗻𝗲𝗲𝗱 𝗮 𝘁𝗲𝘀𝘁 𝗷𝗶𝗴, 𝗮𝗻𝗱 𝘁𝗵𝗲 𝗯𝗲𝘀𝘁 𝘄𝗮𝘆 𝘁𝗼 𝘁𝗲𝘀𝘁 𝘁𝗵𝗲 𝗷𝗶𝗴 𝗶𝘀 𝗮𝗻𝗼𝘁𝗵𝗲𝗿
1️⃣2️⃣3️⃣ A simple Todo list for the Wearable device I can return to the Wearable device, and I prepared a short ToDo list with a few points. 1️⃣ The first program feature of all my firmware projects is the import
🚀🚀🚀 A new instrument for my lab I have had the ingenious Adjustable Transformer EA-STT 2000 B-4.5A for almost 6 years. Its output voltage is 260 VAC. Now I need to test a new device at 380 VAC. I purchased
🚀🚀🚀 Complete Wearable device, ready for programming In the picture, you can see both units of the Wearable device prototype I manufactured recently. Both units are identical. 1️⃣ STM32L051 2️⃣ 6-axis IMU 3️⃣ a complete BMS with a trailing buck/boost
🆕🆕🆕 New wearable board is born After a while, two beautiful board assemblies are finished and ready for another step. 1️⃣ careful optical check 2️⃣ careful electrical check 3️⃣ SWD and firmware part Both board assemblies came perfectly. I am
🛠🛠🛠 Manufacturing of the new wearable device Not so long ago, I wrote about a concept of a wearable device I was working on. Today, I am ready to assemble the prototype boards. I am going to prepare two prototypes.